Units of Measurement — Question 8

Section 1-3 · Chemistry pages 61–62

Show solutionHide solution

Question 8

Select an instrument with a suitable working range

A single transfer must deliver 0.750 mL. The available devices are a 250 mL beaker marked every 50 mL, a 10 mL cylinder marked every 0.2 mL, and an adjustable pipette with a stated operating range of 100–1000 μ\muL. Use 1mL=1000μL1\ \mathrm{mL}=1000\ \mu\mathrm L.

Diagram shown in the original SVG worksheet.

  1. Convert the target to μ\muL and choose the most suitable device on the information given.

  2. Explain why the largest-capacity device is not automatically the best choice.

  3. Can the same adjustable pipette deliver 1.50 mL in one operation within its stated range? What additional information is needed to judge measurement accuracy?

Question 8 - Solution

Select an instrument with a suitable working range

Diagram shown in the original SVG worksheet.

(a) Match target to range

0.750mL=750μL.0.750\ \mathrm{mL}=750\ \mu\mathrm L.This setting lies within 100–1000 μ\muL, so the adjustable pipette is the most suitable listed device for the small transfer. Its range directly includes the requested setting.

(b) Separate capacity from suitability

The beaker can contain much more liquid, but its 50 mL markings are far coarser than a 0.750 mL target. The cylinder has finer markings, yet the adjustable pipette is intended to deliver a selectable small volume. Capacity alone does not establish accuracy.

(c) Respect the stated range

1.50mL=1500μL>1000μL.1.50\ \mathrm{mL}=1500\ \mu\mathrm L>1000\ \mu\mathrm L.No single operation is allowed at that setting. To judge accuracy, consult the device's specified tolerance and calibration at the intended setting, along with the applicable operating procedure.

Check and interpretation

The choice is based on the stated range and task. No unprovided accuracy specification is assumed.