Significant Figures and Calculations — Question 5

Section 1-5 · Chemistry pages 95–96

Show solutionHide solution

Question 5

A product and a quotient share a limiting measured input

A rectangular foil has measured sides 4.20 cm and 1.6 cm, and measured mass 18.742 g. Define its areal mass as mass divided by area. Use the conventional multiplication/division rule: retain as many significant figures as the least precise measured factor. Keep guard digits through intermediate calculations.

Diagram shown in the original SVG worksheet.

  1. Calculate the area and report it with the appropriate significant figures.

  2. Calculate and report the areal mass in g/cm2\mathrm{g/cm^2}, using the unrounded area internally.

  3. Identify the measurement that limits both final reports. Would more digits in the mass alone improve the permitted significant-figure count?

Question 5 - Solution

A product and a quotient share a limiting measured input

Diagram shown in the original SVG worksheet.

(a) Form the area

A=(4.20)(1.6)=6.72cm2.A=(4.20)(1.6)=6.72\ \mathrm{cm^2}.The side 1.6 cm has two significant figures, so the separately reported area is 6.7cm2\boxed{6.7\ \mathrm{cm^2}}. Keep 6.72 internally for the next step.

(b) Divide using guard digits

q=18.742g6.72cm2=2.788988…g/cm2.q=\frac{18.742\ \mathrm g}{6.72\ \mathrm{cm^2}}=2.788988\ldots\ \mathrm{g/cm^2}.q=2.8g/cm2(2 significant figures).\boxed{q=2.8\ \mathrm{g/cm^2}}\qquad\text{(2 significant figures).}The calculator digits are intermediate information, not all justified final digits.

(c) Locate the limiting measurement

The 1.6 cm side limits both calculations to two significant figures. The other side has three and the mass has five. Merely adding digits to the mass cannot remove the limitation from the side measurement; improved measurement of that side would be needed.

Check and interpretation

Area units are squared length, and mass divided by area has units g/cm2\mathrm{g/cm^2}. The same narrow input precision limits both results.