Density — Question 2

Section 1-8 · Chemistry pages 149–150

Show solutionHide solution

Question 2

Use displacement and diagnose trapped air

An irregular, nonporous solid of mass 31.50 g is completely immersed in water without dissolving. The cylinder reads 24.0 mL before immersion and 28.5 mL afterward. Use 1mL=1cm31\ \mathrm{mL}=1\ \mathrm{cm^3} exactly.

Diagram shown in the original SVG worksheet.

  1. Find the displaced volume and density with appropriate precision.

  2. In a repeat trial, a trapped air bubble adds 0.5 mL to the apparent displaced volume. Calculate the resulting apparent density.

  3. Explain the direction of the bias and give a practical way to reduce it.

Question 2 - Solution

Use displacement and diagnose trapped air

Diagram shown in the original SVG worksheet.

(a) Subtract readings before dividing

V=28.5−24.0=4.5mL.V=28.5-24.0=4.5\ \mathrm{mL}.ρ=31.504.5=7.0gmL−1.\rho=\frac{31.50}{4.5}=\boxed{7.0\ \mathrm{g\,mL^{-1}}}.The difference has one decimal place and two significant figures.

(b) Include the bubble volume

The apparent displacement becomes 4.5+0.5=5.04.5+0.5=5.0 mL. Thusρapparent=31.505.0=6.3gmL−1.\rho_{\mathrm{apparent}}=\frac{31.50}{5.0}=\boxed{6.3\ \mathrm{g\,mL^{-1}}}.The mass used is still the solid mass.

(c) Control the bias

The bubble increases the denominator without increasing the measured solid mass, so the apparent density is too low. Wet the solid and gently agitate it under water to release visible trapped bubbles before reading the meniscus at eye level.

Check and interpretation

An inflated volume must reduce m/Vm/V for fixed positive mass.