Determining the Form of the Rate Law — Question 8

Section 12-3 · Chemistry pages 2041–2042

Show solutionHide solution

Question 8

Check the assumption behind a clock method

A clock changes color after a fixed 0.00100 M product accumulates. Runs X and Y reach the endpoint in 20.0 and 10.0 s. Assume initially negligible product and the same endpoint calibration.

Diagram shown in the original SVG worksheet.

  1. Estimate the ratio of average product formation rates.

  2. Explain what must be true to use that ratio as an initial-rate ratio, and how unequal thresholds would bias it.

Question 8 - Solution

Check the assumption behind a clock method

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

The averages are 5.00×10−55.00\times10^{-5} and 1.00×10−41.00\times10^{-4} M s−1^{-1}, so Y/X = 2.00.

(b) Analysis

Conversion must be small enough that rate changes are negligible during each clock interval, with equal mixing delays. If thresholds differ, the ratio is (ΔPY/tY)/(ΔPX/tX)(\Delta P_Y/t_Y)/(\Delta P_X/t_X), not merely tX/tYt_X/t_Y.

Check and interpretation

Inverse time measures an average rate under a fixed-threshold condition; it is not automatically an instantaneous rate.