Acid–Base Indicators — Question 6

Section 15-5 · Chemistry pages 2617–2618

Show solutionHide solution

Question 6

Check whether the indicator disturbs a small sample

Assume ideal dilute aqueous behavior at 25 ∘^\circC, Kw=1.00×10−14K_w=1.00\times10^{-14}, and concentrations in mol L−1^{-1} unless stated otherwise. A 1.00 mL HA/A buffer initially contains 1.00×10−71.00\times10^{-7} mol of each partner. The added indicator solution has a known net strong-acid load of 2.00×10−82.00\times10^{-8} mol, including its solvent additives. Volume change is negligible.

Diagram shown in the original SVG worksheet.

  1. Find the buffer-ratio pH shift caused by the reagent load.

  2. Explain how to reduce or measure this systematic disturbance.

Question 6 - Solution

Check whether the indicator disturbs a small sample

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

A decreases to 8.00×10−88.00\times10^{-8} mol and HA increases to 1.20×10−71.20\times10^{-7} mol. The shift is log⁡(2/3)=−0.176\log(2/3)=-0.176 pH unit.

(b) Analysis

Use a smaller indicator dose, larger sample or greater buffer inventory, and run a reagent blank. Indicator mixtures must be sufficiently small not to perturb the system being observed.

Check and interpretation

The acid load is explicitly supplied; it is not inferred merely from the indicator being a weak acid.