Precipitation and Qualitative Analysis — Question 6

Section 15-7 · Chemistry pages 2657–2658

Show solutionHide solution

Question 6

Test whether a proposed selective-removal target is feasible

Assume ideal dilute aqueous behavior at 25 ∘^\circC, Kw=1.00×10−14K_w=1.00\times10^{-14}, and concentrations in mol L−1^{-1} unless stated otherwise. Use Ksp(MX)=10−10K_{sp}(MX)=10^{-10}, Ksp(NX)=10−8K_{sp}(NX)=10^{-8}, initial M = 0.0100 M and N = 0.00100 M. The target is 99.99% removal of M while no NX precipitates. Neglect dilution and side reactions.

Diagram shown in the original SVG worksheet.

  1. Find the X concentration required by the M target.

  2. Compare with the no-NX upper limit and decide feasibility.

Question 6 - Solution

Test whether a proposed selective-removal target is feasible

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

The target residual M is 0.0100(10−4)=10−60.0100(10^{-4})=10^{-6} M. MX equilibrium therefore requires [X]=10−10/10−6=10−4[X]=10^{-10}/10^{-6}=10^{-4} M.

(b) Analysis

No NX requires [X]≤10−8/0.00100=10−5[X]\le10^{-8}/0.00100=10^{-5} M. The required lower bound exceeds the allowed upper bound, so the target is impossible under these assumptions.

Check and interpretation

A feasibility test should precede choosing a reagent dose.