Free Energy and Work — Question 7

Section 16-9 · Chemistry pages 2859–2860

Show solutionHide solution

Question 7

Test whether a chemical converter can lift a specified load

Unless stated otherwise, use constant temperature and pressure, a closed system, and reversible pressure-volume exchange with the surroundings. Define useful work as work other than pressure-volume work; useful output is positive. A chemical process has ΔG=−6.00\Delta G=-6.00 kJ for the available sample. It drives a lift raising a 10.0 kg mass by 50.0 m. Ignore pressure work in the lift and use g=9.81g=9.81 m/s2^2.

Diagram shown in the original SVG worksheet.

  1. Calculate the required useful output and the reversible maximum height.

  2. Find the minimum fraction of available work that must reach the load.

Question 7 - Solution

Test whether a chemical converter can lift a specified load

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

The load requires mgh=10.0(9.81)(50.0)=4905mgh=10.0(9.81)(50.0)=4905 J. The reversible maximum height is 6000/[10.0(9.81)]=61.16216000/[10.0(9.81)]=61.1621 m.

(b) Analysis

The required fraction is 4905/6000=0.81754905/6000=0.8175, or 81.75 percent. The lift is thermodynamically possible under the stated budget only if conversion and transfer losses leave at least this fraction.

Check and interpretation

The result is an energy feasibility test, not a claim about motor power or lifting speed.