Corrosion — Question 7

Section 17-6 · Chemistry pages 2979–2980

Show solutionHide solution

Question 7

Compare uniform thinning with a localized pit

A specimen loses 0.0500 g Fe of density 7.87 g/cm3^3. Compare uniform removal over 100 cm2^2 with removal confined to a flat-bottomed 0.100 cm2^2 pit. Use this simple geometric model only.

Diagram shown in the original SVG worksheet.

  1. Find mean penetration depth in millimeters for each case.

  2. Explain why total mass loss alone can underestimate localized structural concern.

Question 7 - Solution

Compare uniform thinning with a localized pit

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

Lost volume is 0.0500/7.87=0.006353240.0500/7.87=0.00635324 cm3^3. Uniform depth is 0.00635324/100=0.00006353240.00635324/100=0.0000635324 cm = 0.000635324 mm. Pit depth is 0.0635324 cm = 0.635324 mm.

(b) Analysis

The pit is 1000 times deeper for the same mass loss. Concentrating damage can perforate or weaken a small region while average thinning remains tiny.

Check and interpretation

Real pit shape and current distribution differ; the supplied flat-bottom approximation fixes the geometry.