Commercial Electrolytic Processes — Question 6

Section 17-8 · Chemistry pages 3017–3018

Show solutionHide solution

Question 6

Convert aluminum production into specific electrical energy

Use F = 96485 C/mol electrons. A hypothetical aluminum cell operates at 4.50 V with 90.0 percent current efficiency. Producing each Al atom requires three electrons. Use Al molar mass 26.98 g/mol and 1kWh=3.60×1061\ \mathrm{kWh}=3.60\times10^6 J. Assume voltage and efficiency remain constant.

Diagram shown in the original SVG worksheet.

  1. Find the charge and electrical energy needed per kilogram of Al.

  2. Explain why this value is not the total energy requirement of the entire aluminum supply chain.

Question 6 - Solution

Convert aluminum production into specific electrical energy

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

One kilogram is 1000/26.98=37.06451000/26.98=37.0645 mol Al. Required circuit charge is Q=3F(1000/26.98)/0.900≈1.1921×107Q=3F(1000/26.98)/0.900\approx1.1921\times10^7 C. Energy is VQ≈5.3643×107VQ\approx5.3643\times10^7 J, or 14.9007 kWh/kg.

(b) Analysis

This is cell electrical input under the stated conditions. It omits mining, alumina refining, anode preparation, auxiliaries and other energy flows. It is not an independently measured industry average.

Check and interpretation

Lower current efficiency increases charge per unit product, so divide by efficiency.