Show solutionHide solution
Question 8
Use a stated inverse-square exposure model
In an ideal point-source model with no shielding or scattering, absorbed-dose rate is 8.00 microGy/h at 2.00 m and scales as .
Diagram shown in the original SVG worksheet.
Find the modeled dose rate at 4.00 m and dose accumulated there in 3.00 h.
Compare with 2.00 h at 2.00 m, and state two assumptions that limit applying the model.
Question 8 - Solution
Use a stated inverse-square exposure model
Diagram shown in the original SVG worksheet.
(a) Reasoning and result
Doubling distance gives one quarter the rate, 2.00 microGy/h. Three hours gives 6.00 microGy.
(b) Analysis
Two hours at 2.00 m gives 16.0 microGy. The first exposure is of the second. The model assumes a point-like source at these distances and unchanged attenuation/scattering conditions; extended sources and intervening material can violate it.
Check and interpretation
This ideal calculation is not a substitute for measurement in an actual exposure setting.