The Chemistry of Oxygen — Question 6

Section 20-5 · Chemistry pages 3377–3378

Show solutionHide solution

Question 6

Distinguish open-gas Henry equilibrium from a closed inventory

For an ideal dilute solution at fixed temperature, use [O2]=kHpO2[O_2]=k_Hp_{O_2} with kH=1.30×10−3k_H=1.30\times10^{-3} mol L−1^{-1} bar−1^{-1}. An open gas reservoir maintains pO2=0.210p_{O_2}=0.210 bar above 2.00 L water. Use molar mass O2=32.0O_2=32.0 g/mol.

Diagram shown in the original SVG worksheet.

  1. Find dissolved oxygen concentration in mol/L and mg/L, and total dissolved mass.

  2. Explain why the same calculation may fail if the water is placed in a sealed container with a very small finite oxygen inventory.

Question 6 - Solution

Distinguish open-gas Henry equilibrium from a closed inventory

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

Concentration is 1.30×10−3(0.210)=2.73×10−41.30\times10^{-3}(0.210)=2.73\times10^{-4} mol/L. Multiplying by 32.0 g/mol gives 8.736 mg/L, or 17.472 mg in 2.00 L.

(b) Analysis

In a sealed finite system, dissolution removes oxygen from the gas and can lower its partial pressure. Gas and liquid equilibrium must be solved together with total oxygen conservation; the original gas pressure need not stay fixed. The open-reservoir assumption supplies oxygen to maintain the stated pressure.

Check and interpretation

The Henry coefficient convention and pressure units are explicitly specified.