The Chemistry of Sulfur — Question 8

Section 20-6 · Chemistry pages 3401–3402

Show solutionHide solution

Question 8

Predict sulfide speciation at imposed pH

In an ideal dilute model, H2S⇌H++HS−H_2S\rightleftharpoons H^++HS^- has pKa1=7.00pK_{a1}=7.00. Neglect S2−S^{2-} and gas transfer. Total dissolved sulfide is 0.00100 mol/L, with pH maintained externally at either 6.00 or 9.00.

Diagram shown in the original SVG worksheet.

  1. Find neutral H2SH_2S concentration at each pH.

  2. Explain why the same total sulfide does not imply the same volatile neutral fraction, and state what must be added to calculate gas-phase concentration.

Question 8 - Solution

Predict sulfide speciation at imposed pH

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

[HS−]/[H2S]=10pH−7[HS^-]/[H_2S]=10^{pH-7}. At pH 6 the ratio is 0.100, so [H2S]=0.00100/1.100=9.09×10−4[H_2S]=0.00100/1.100=9.09\times10^{-4} M. At pH 9 the ratio is 100, giving 9.90×10−69.90\times10^{-6} M.

(b) Analysis

The neutral fraction is much larger at low pH because protonation is favored. A gas-liquid partition law and gas/liquid inventories are needed for an actual headspace concentration. Total sulfur analysis alone cannot specify this phase distribution.

Check and interpretation

The imposed-pH and no-gas-transfer assumptions define a speciation calculation, not a gas-release procedure.