Pressure — Question 9

Section 5-1 · Chemistry pages 743–744

Show solutionHide solution

Question 9

Calibrate an offset pressure sensor

A sensor model is Pread=Ptrue+bP_{read}=P_{true}+b. At a known pressure of 80.0 kPa it reads 82.5 kPa. Later it reads 110.0 kPa. Assume the offset remains constant.

Diagram shown in the original SVG worksheet.

  1. Find the corrected later pressure.

  2. Why does a single calibration not establish that the sensor has the correct scale factor?

Question 9 - Solution

Calibrate an offset pressure sensor

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

b=82.5−80.0=2.5b=82.5-80.0=2.5 kPa. Corrected pressure is 110.0−2.5=107.5110.0-2.5=107.5 kPa.

(b) Analysis

One reference point can determine an offset only after assuming unit slope. A more general model Pread=aPtrue+bP_{read}=aP_{true}+b requires at least two independent reference pressures to determine both parameters.

Check and interpretation

The correction is conditional on the specified additive-offset model.