Show solutionHide solution
Question 2
Use the cubic wind-power model within its assumptions
For a hypothetical turbine, delivered power is modeled by , with air density 1.20 kg/m, swept area 10.0 m and constant combined extraction/conversion factor C = 0.400. Assume operation below any power cap.
Diagram shown in the original SVG worksheet.
Calculate power at wind speeds 6.00 and 9.00 m/s and their ratio.
Why should this cubic prediction not be extended to arbitrarily large wind speed?
Question 2 - Solution
Use the cubic wind-power model within its assumptions
Diagram shown in the original SVG worksheet.
(a) Reasoning and result
The constant factor is . At 6.00 m/s, W. At 9.00 m/s, W. The ratio is , or 3.38.
(b) Analysis
Actual turbines have controls, rated-power limits and shutdown conditions; the conversion factor also need not remain constant. The supplied model only applies in its assumed operating range.
Check and interpretation
Wind kinetic-energy flux is an energy rate; the output is power, not energy over an unspecified duration.