New Energy Sources — Question 7

Section 6-6 · Chemistry pages 1019–1020

Show solutionHide solution

Question 7

Estimate geothermal output after pumping costs

A hypothetical geothermal stream supplies liquid water at 2.00 kg/s, cooling by 40.0 K through a heat exchanger without phase change. Use c = 4.20 kJ kg−1^{-1} K−1^{-1}. A converter turns 12.0% of extracted heat into electricity, while pumps consume 5.00 kW.

Diagram shown in the original SVG worksheet.

  1. Find extracted thermal power, gross electrical power and net electrical power.

  2. Can steady output indefinitely be inferred from this one operating point?

Question 7 - Solution

Estimate geothermal output after pumping costs

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

Thermal power is ṁcΔT=2.00(4.20)(40.0)=336\dot m c\Delta T=2.00(4.20)(40.0)=336 kJ/s = 336 kW. Gross electricity is 0.120(336)=40.320.120(336)=40.32 kW. Net export is 40.32−5.00=35.3240.32-5.00=35.32 kW, or 35.3 kW.

(b) Analysis

No. Long-term output depends on heat replenishment, reservoir cooling, water circulation and sustainable extraction rates. A measured flow and temperature drop describe current operation, not indefinite resource recovery.

Check and interpretation

The pumping load must be subtracted from gross electricity, not from the thermal input and then multiplied by efficiency.