The Wave Equation — Question 4

Section 28-2 · Calculus pages 4887–4888

Show solutionHide solution

Question 4

Two semi-infinite strings meet at x=0x=0, share tension 𝒯>0\mathcal T>0 and have densities μ1,μ2>0\mu_1,\mu_2>0. Set cj=𝒯/μjc_j=\sqrt{\mathcal T/\mu_j} and Zj=𝒯/cjZ_j=\mathcal T/c_j. The massless junction has continuous displacement and continuous transverse force 𝒯ux\mathcal T u_x. For a smooth incident pulse with 0<∫ℝ(F′)2<∞0<\int_{\mathbb R}(F^{\prime})^2<\infty, write u1=F(t−x/c1)+RF(t+x/c1)(x<0),u2=DF(t−x/c2)(x>0).u_1=F(t-x/c_1)+R F(t+x/c_1)\quad(x<0),\qquad u_2=D F(t-x/c_2)\quad(x>0).

Tasks

  1. Verify each traveling term solves its local wave equation and derive the two junction equations for R,DR,D.

  2. Solve for R,DR,D and classify the sign of the reflected displacement when the second string is denser or lighter.

  3. Using rightward power 𝒫=−𝒯utux\mathcal P=-\mathcal T u_tu_x, derive the reflected and transmitted energy fractions and prove their sum is one.

  4. Evaluate the case μ2=9μ1\mu_2=9\mu_1. Analyze the limits Z2/Z1→0Z_2/Z_1\to 0 and →∞\to\infty, and explain why a transmitted displacement amplitude above one need not violate energy conservation.

Question 4 – Solution

Strategy. Displacement amplitudes and energy fractions differ because the strings have different wave impedances.

Step 1: Apply the interface conditions. Every term of the form F(t∓x/cj)F(t\mp x/c_j) has utt=cj2uxxu_{tt}=c_j^2u_{xx}. At the junction, displacement continuity gives 1+R=D1+R=D. The slope condition gives 𝒯c1(R−1)F′(t)=−𝒯c2DF′(t),Z1(1−R)=Z2D.\frac{\mathcal T}{c_1}(R-1)F'(t) =-\frac{\mathcal T}{c_2}D F'(t),\qquad \boxed{Z_1(1-R)=Z_2D.} Since FF is nonconstant, these amplitude equations follow.

Step 2: Solve and interpret the amplitudes. Solving the two equations gives R=Z1−Z2Z1+Z2,D=2Z1Z1+Z2.\boxed{R=\frac{Z_1-Z_2}{Z_1+Z_2},\qquad D=\frac{2Z_1}{Z_1+Z_2}.} Here Zj=𝒯μjZ_j=\sqrt{\mathcal T\mu_j}. A denser second string gives R<0R<0, an inverted reflected displacement. A lighter string gives R>0R>0. Equal impedances give no reflection and D=1D=1.

Step 3: Account for energy flux. The incident rightward power is Z1(F′)2Z_1(F')^2, the reflected leftward power has magnitude Z1R2(F′)2Z_1R^2(F')^2, and transmitted power is Z2D2(F′)2Z_2D^2(F')^2. The cross terms in −𝒯utux-\mathcal T u_tu_x on the incident side cancel. For a pulse with finite nonzero ∫(F′)2\int(F')^2, integration in time therefore gives ℛ=R2,𝒟=Z2Z1D2,ℛ+𝒟=(Z1−Z2)2+4Z1Z2(Z1+Z2)2=1.\boxed{\mathcal R=R^2,\qquad \mathcal D=\frac{Z_2}{Z_1}D^2,\qquad \mathcal R+\mathcal D= \frac{(Z_1-Z_2)^2+4Z_1Z_2}{(Z_1+Z_2)^2}=1.}

Step 4: Test examples and extreme impedances. If μ2=9μ1\mu_2=9\mu_1, then Z2=3Z1Z_2=3Z_1, so R=−1/2R=-1/2, D=1/2D=1/2, ℛ=1/4\mathcal R=1/4 and 𝒟=3/4\mathcal D=3/4. As Z2/Z1→0Z_2/Z_1\to 0, R→1R\to 1 and D→2D\to 2, but 𝒟→0\mathcal D\to 0. As Z2/Z1→∞Z_2/Z_1\to\infty, R→−1R\to-1, D→0D\to 0 and again 𝒟→0\mathcal D\to 0. These are the free-end and fixed-end reflection limits, respectively. Energy depends on impedance as well as squared displacement amplitude.