Polymer Classification by Properties — Question 10

Section 27-7 · Organic Chemistry pages 6149–6150

Show solutionHide solution

Question 10

Correct a crystallinity calculation for cold crystallization and filler

Use the specified model for initial polymer crystallinity: Xc=(ΔHm−ΔHcc)/(wpΔHm0)X_c=(\Delta H_m-\Delta H_{cc})/(w_p\Delta H_m^0). The filler is inert, and the reference applies to the same crystal form.

Diagram shown in the original SVG worksheet.

  1. Calculate initial crystallinity of the polymer fraction.

  2. Explain why the cold-crystallization enthalpy is subtracted.

  3. What incorrect value results if filler normalization is omitted?

Question 10 - Solution

Correct a crystallinity calculation for cold crystallization and filler

Diagram shown in the original SVG worksheet.

(a)

Xc = (60-20)/(0.80 times 200) = 0.25, or 25 percent of the polymer fraction.

(b)

Crystals formed during heating contribute to the later melting peak but were absent initially. Subtraction removes that contribution in this model.

(c)

Omitting the polymer mass fraction gives 40/200 = 0.20, or 20 percent; this uses the whole-sample mass basis incorrectly.