Dimensional Analysis — Question 3

Section 1-6 · Chemistry pages 111–112

Show solutionHide solution

Question 3

Connect flow rate, time and collected volume

A pump delivers liquid at a constant measured rate of 18.0 mL/min. It operates for a measured 2.50 h. Assume no loss or interruption. Use exactly 60 min per hour and 1000 mL per liter.

Diagram shown in the original SVG worksheet.

  1. Calculate the collected volume in liters with a single factor-label chain.

  2. At the same rate, how long would collecting 0.750 L take? Report minutes.

  3. A student multiplies 0.750 L by 18.0 mL/min to find time. Use units to explain the problem and correct the operation.

Question 3 - Solution

Connect flow rate, time and collected volume

Diagram shown in the original SVG worksheet.

(a) Multiply rate by elapsed time

V=18.0mLmin(2.50h)60min1h1L1000mL=2.70L.V=18.0\ \frac{\mathrm{mL}}{\mathrm{min}}\,(2.50\ \mathrm h)\,\frac{60\ \mathrm{min}}{1\ \mathrm h}\,\frac{1\ \mathrm L}{1000\ \mathrm{mL}}=\boxed{2.70\ \mathrm L}.Time units cancel, leaving only volume.

(b) Use the reciprocal rate

t=0.750L1000mL1L1min18.0mL=41.666…min.t=0.750\ \mathrm L\,\frac{1000\ \mathrm{mL}}{1\ \mathrm L}\,\frac{1\ \mathrm{min}}{18.0\ \mathrm{mL}}=41.666\ldots\ \mathrm{min}.t=41.7min.\boxed{t=41.7\ \mathrm{min}}.The reciprocal rate expresses time required per unit volume.

(c) Check the dimensions before arithmetic

Volume multiplied by volume per time has units of volume squared per time, not time. Divide the requested volume by the rate, using compatible volume units, so the volume cancels and time remains.

Check and interpretation

The target volume is less than one-third of 2.70 L, so its collection time should be less than one-third of 150 min; 41.7 min is consistent.