Temperature — Question 7

Section 1-7 · Chemistry pages 139–140

Show solutionHide solution

Question 7

Read a temperature-time graph without confusing a plateau with no energy transfer

The graph gives an idealized temperature record for a sample: at times 0.0, 2.0, 4.0 and 6.0 min, the temperatures are 20.0, 40.0, 40.0 and 70.0∘C70.0^\circ\mathrm C. Treat the plotted segments as linear and the given coordinates as exact for this exercise. Use TK=tC+273.15T_K=t_C+273.15.

Diagram shown in the original SVG worksheet.

  1. Calculate the temperature-change rate on each segment in Celsius degrees per minute.

  2. Calculate the net temperature rise and average temperature-change rate over the full six minutes. Give the average to three significant figures.

  3. Express the plateau temperature in K. Does the plateau alone establish that no heat enters the sample or prove a particular phase change?

Question 7 - Solution

Read a temperature-time graph without confusing a plateau with no energy transfer

Diagram shown in the original SVG worksheet.

(a) Calculate segment slopes

s0−2=40−202−0=10∘C/min,s_{0-2}=\frac{40-20}{2-0}=10\ ^\circ\mathrm C/\mathrm{min},s2−4=0,s4−6=70−406−4=15∘C/min.s_{2-4}=0,\qquad s_{4-6}=\frac{70-40}{6-4}=15\ ^\circ\mathrm C/\mathrm{min}.The last segment rises fastest.

(b) Use endpoint change over total time

ΔtC=70.0−20.0=50.0∘C=50.0K.\Delta t_C=70.0-20.0=\boxed{50.0^\circ\mathrm C}=50.0\ \mathrm K.savg=506=8.333…→8.33∘C/min.s_{\mathrm{avg}}=\frac{50}{6}=8.333\ldots\longrightarrow\boxed{8.33\ ^\circ\mathrm C/\mathrm{min}}.This includes the two-minute plateau.

(c) Interpret what is observed

The plateau is at 40.0+273.15=313.1540.0+273.15=313.15 K. Constant temperature does not establish zero heat transfer: for example, energy transfer during a phase change can occur without a temperature rise. The graph alone does not identify a phase change, substance, or energy balance; more observations are needed.

Check and interpretation

The average rate lies between the minimum and maximum segment slopes, as expected. Temperature slope is not itself a heat-flow rate.