Show solutionHide solution
Question 5
Determine limestone demand for an idealized slag
A charge contains 60.08 kg SiO2. Model slag formation using CaCO3 to CaO + CO2 followed by CaO + SiO2 to CaSiO3. Limestone is 90.0 mass percent CaCO3; its remainder is inert. Use molar masses SiO2 = 60.08, CaCO3 = 100.09 and CO2 = 44.01 g/mol. Assume quantitative conversion and no other CaO consumption.
Diagram shown in the original SVG worksheet.
Find the limestone mass required and CO2 released from its carbonate decomposition.
Write the net equation and explain the chemical role of CaO and the limitation of representing all slag as pure CaSiO3.
Question 5 - Solution
Determine limestone demand for an idealized slag
Diagram shown in the original SVG worksheet.
(a) Reasoning and result
The silica amount is 1.000 kmol, requiring 1.000 kmol CaCO3 = 100.09 kg pure carbonate. Limestone needed is kg. Decomposition releases 1.000 kmol CO2 = 44.01 kg.
(b) Analysis
The net reaction is . Basic CaO combines with the acidic silica component, transferring it to a slag phase rather than reducing silicon to elemental Si. Actual slags are multicomponent mixtures with composition-dependent properties and other flux demands.
Check and interpretation
The impurity mass in limestone is not additional CaCO3 and cannot supply CaO in the stated model.